Step-by-Step Cleaning Process

Macro recommends the following process to clean the bins before return.

Step 1 – Remove all foreign materials such as staples, metal objects, paint, tape, labels, debris, and organic matter from your Macro Plastics™ products by using hand tools or similar equipment.

Step 2 – Place the Macro Plastics™ products on a clean solid surface for washing.

Step 3 – Use a high-pressure, cold water spray to dislodge and remove all remaining dirt, debris, juices, or organic matter. Clean all interior and exterior surfaces and rotate the MacroBin as necessary to ensure all surfaces are cleaned thoroughly. Experience has shown that the use of only a hydro-cooler, bin washer, or other such device is insufficient to remove all debris.

* Please refer to your pressure washer owners™ manual for proper personal protective equipment guidelines.

Step 4 – Should Step 3 fail to remove all residue, use a brush to dislodge any remaining debris. Repeat Step 3.

Step 5 – Place Macro Plastics™ products in a clean area to dry.

Comments are closed.